VSS with 5.101 code
Re: VSS with 5.101 code
Re: VSS with 5.101 code
I switched to the old version for the moment.
The datalog with the new code is in my previous message, in the link, you can download it as it was too big for upload on the board.
Guillaume
-
- Posts: 1696
- Joined: Fri Apr 04, 2008 1:28 pm
Re: VSS with 5.101 code
If the problem can't be seen in the datalog (I think that is what you said), there's no point me looking at it. What I need is a datalog that clearly illustrates the problem.
You can normally edit datalogs to show only the relevant information while still being small enough to load here. You can do this in any text editor (like notepad++). Don't touch the first four lines, which will look something like this:
Code: Select all
"MShift 5.101 : ** V5.101 MegaShift by B&G **"
"Capture Date: Tue Apr 28 06:10:05 PDT 2015"
Time Seconds Mode Speed VSerr VSrst RPM miles load avload decel TPS rMAP arev mpg in1adc in2adc in3adc swA swB swC swD lverr soln Out1 Out2 Out3 Out4 Out5 Out6 Out7 Out8 Out9 UP DWN Dreq Ureq hyst led1 led2 led3 led4 block fUP fDWN Jake buadERR shftBut cGear tGear mGear eGear gErr TCC TCChyst Brake VSSHz OS IS slip cltF line auxCH Error PC% Sp0% Sp1% Sp2% Sp3% dbug burn 4WD sp0x sp0y sp3x sp3y ptA ptE srpm cruz Vper iRat wRPM idlAdj spkAdj
sec sec mph rpm miles kpa kpa mpg volts volts volts sec volts % sec Hz rpm % ºF psi V % % % % % ' ' ' ' :1 rpm °
Code: Select all
"MShift 5.101 : ** V5.101 MegaShift by B&G **"
"Capture Date: Tue Apr 28 06:10:05 PDT 2015"
Time Seconds Mode Speed VSerr VSrst RPM miles load avload decel TPS rMAP arev mpg in1adc in2adc in3adc swA swB swC swD lverr soln Out1 Out2 Out3 Out4 Out5 Out6 Out7 Out8 Out9 UP DWN Dreq Ureq hyst led1 led2 led3 led4 block fUP fDWN Jake buadERR shftBut cGear tGear mGear eGear gErr TCC TCChyst Brake VSSHz OS IS slip cltF line auxCH Error PC% Sp0% Sp1% Sp2% Sp3% dbug burn 4WD sp0x sp0y sp3x sp3y ptA ptE srpm cruz Vper iRat wRPM idlAdj spkAdj
sec sec mph rpm miles kpa kpa mpg volts volts volts sec volts % sec Hz rpm % ºF psi V % % % % % ' ' ' ' :1 rpm °
4098.974 202 1 83.6 0 0 1523 3.880 48.7 48.8 0 0.0 102.3 0 11.49 0.000 0.000 0.410 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2227 3329 2220 68 180.0 0.1 0.000 1 70 0 0 0 30 0 0 1 83.8 0.0 0.0 0.0 0 18 1514 33 0.449 0.480 1080.8 0 0.0
4099.040 202 1 83.6 0 0 1523 3.882 48.7 48.8 0 0.0 102.3 0 11.49 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2227 3329 2220 68 180.0 0.1 0.000 1 70 0 0 0 30 0 0 1 83.8 0.0 0.0 0.0 0 18 1514 34 0.449 0.480 1080.8 0 0.0
4099.106 202 1 83.6 0 0 1523 3.883 48.7 48.8 0 0.0 102.3 0 11.49 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2227 3329 2220 68 180.0 0.0 0.000 1 70 0 0 0 30 0 0 1 83.8 0.0 0.0 0.0 0 18 1514 34 0.449 0.480 1080.8 0 0.0
4099.172 202 1 83.6 0 0 1523 3.885 48.7 48.8 0 0.0 102.3 0 11.49 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2227 3329 2220 68 180.0 0.0 0.000 1 70 0 0 0 30 0 0 1 83.8 0.0 0.0 0.0 0 18 1514 34 0.449 0.480 1080.8 0 0.0
4099.238 202 1 83.6 0 0 1523 3.886 48.7 48.8 0 0.0 102.3 0 11.49 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2227 3329 2220 68 180.0 0.0 0.000 1 70 0 0 0 30 0 0 1 83.8 0.0 0.0 0.0 0 18 1514 34 0.449 0.480 1080.8 0 0.0
4099.304 202 1 83.6 0 0 1523 3.888 48.7 48.7 0 0.0 102.3 0 11.49 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2227 3329 2220 68 180.0 0.1 0.000 1 70 0 0 0 30 0 0 1 83.8 0.0 0.0 0.0 0 18 1514 34 0.449 0.480 1080.8 0 0.0
4099.370 202 1 83.6 0 0 1523 3.889 48.7 48.7 0 0.0 102.3 0 11.49 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2227 3329 2220 68 180.0 0.1 0.000 1 70 0 0 0 30 0 0 1 83.8 0.0 0.0 0.0 0 18 1514 34 0.449 0.480 1080.8 0 0.0
4099.436 203 1 83.6 0 0 1523 3.891 48.7 48.7 0 0.0 102.4 0 11.49 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2227 3329 2220 68 180.0 0.0 0.000 1 70 0 0 0 30 0 0 1 83.8 0.0 0.0 0.0 0 18 1514 34 0.449 0.480 1080.8 0 0.0
4099.502 203 1 83.6 0 0 1523 3.892 48.7 48.7 0 0.0 102.4 0 11.49 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2227 3329 2220 68 180.0 0.1 0.000 1 70 0 0 0 30 0 0 1 83.8 0.0 0.0 0.0 0 18 1514 34 0.449 0.480 1080.8 0 0.0
4099.568 203 1 83.6 0 0 1523 3.894 48.7 48.7 0 0.0 102.4 0 11.49 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2222 3329 2220 68 180.0 0.1 0.000 1 70 0 0 0 30 0 0 1 83.6 0.0 0.0 0.0 0 18 1514 34 0.450 0.480 1080.8 0 0.0
4099.634 203 1 82.8 0 0 1523 3.895 48.7 48.7 3 0.0 102.4 0 11.48 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2188 3297 2199 69 180.0 0.1 0.000 1 70 0 0 0 30 0 0 1 82.5 0.0 0.0 0.0 0 18 1514 34 0.457 0.484 1070.5 0 0.0
4099.700 203 1 82.0 0 0 1523 3.897 48.7 48.7 3 0.0 102.3 0 11.30 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2169 3265 2160 70 180.0 0.1 0.000 1 70 0 0 0 30 0 0 1 81.5 0.0 0.0 0.0 0 18 1514 34 0.461 0.493 1060.1 0 0.0
Code: Select all
"MShift 5.101 : ** V5.101 MegaShift by B&G **"
"Capture Date: Tue Apr 28 06:10:05 PDT 2015"
Time Seconds Mode Speed VSerr VSrst RPM miles load avload decel TPS rMAP arev mpg in1adc in2adc in3adc swA swB swC swD lverr soln Out1 Out2 Out3 Out4 Out5 Out6 Out7 Out8 Out9 UP DWN Dreq Ureq hyst led1 led2 led3 led4 block fUP fDWN Jake buadERR shftBut cGear tGear mGear eGear gErr TCC TCChyst Brake VSSHz OS IS slip cltF line auxCH Error PC% Sp0% Sp1% Sp2% Sp3% dbug burn 4WD sp0x sp0y sp3x sp3y ptA ptE srpm cruz Vper iRat wRPM idlAdj spkAdj
sec sec mph rpm miles kpa kpa mpg volts volts volts sec volts % sec Hz rpm % ºF psi V % % % % % ' ' ' ' :1 rpm °
4098.974 202 1 83.6 0 0 1523 3.880 48.7 48.8 0 0.0 102.3 0 11.49 0.000 0.000 0.410 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2227 3329 2220 68 180.0 0.1 0.000 1 70 0 0 0 30 0 0 1 83.8 0.0 0.0 0.0 0 18 1514 33 0.449 0.480 1080.8 0 0.0
4099.700 203 1 82.0 0 0 1523 3.897 48.7 48.7 3 0.0 102.3 0 11.30 0.000 0.000 0.405 0 0 0 0 0 5 1 0 1 0 0 0 0 0 0 0 0 0 0 0.0 1 1 1 1 0 0 0 0 0 4.992 4 4 4 4 0 100 0.0 0 2169 3265 2160 70 180.0 0.1 0.000 1 70 0 0 0 30 0 0 1 81.5 0.0 0.0 0.0 0 18 1514 34 0.461 0.493 1060.1 0 0.0
Lance.
-
- Posts: 34
- Joined: Thu Mar 08, 2012 9:00 am
Re: VSS with 5.101 code
FWIW, on the bench, with the VSS signal coming from TransStim, I also had to go up to 80% to get a good VSS input. Within the next few minutes I should know what happens on the car with the actual VR signal coming from the VS Sensor.gui67 wrote: I put the input masking to 75 and then to 80.
Philip
'80 Jaguar XJS 5.3L V12 = MS-2
'74 Jensen Interceptor Mk3 440 V8 = MS-2 + GPIO (GM 4L60e)
Re: VSS with 5.101 code
You can see in the datalog that the speed stays at 0 (sometimes 0.5km/h with the new beta vss isr)
It was when I was triying the old vss isr that I had spikes on the speedo and these spikes could not be seen on other msl files.
For the msl, i manage to shorten the time to make them shorter, but what I did not manage to make yet is to remove columns to keep only the usefull data for Mshift and remove all the fuel and spark calculations from MS3 for example. with all the parameters, the files can become very large even for a short period of time.
thank you for your explanations, I will try to modify the parameters in order to improve the speed input.
Regards
Guillaume
-
- Posts: 1696
- Joined: Fri Apr 04, 2008 1:28 pm
Re: VSS with 5.101 code
The best way to get a nice clean MShift log it to use the serial port on the GPIO board to connect to the laptop (with a project that has only MShift in it - no CAN devices). MShift will still grab all the data from the engine ECU over the CANbus, but the log will be *much* smaller.
Lance.