Ford E4OD support

A forum for discussing applications and implementations of the MegaShift transmission controller code for the GPIO from B&G. This can control up to 8-speeds and 6 shift solenoids (plus a 16x9 table for controlling a PWM line pressure valve). It has manual and fully automatic modes (16x9 load x speed table), with under and over rev-limit protection, and full data logging of all inputs and outputs (among many other abilities). A TransStim to test your completed board is also available.
Forum rules
Post Reply
cobra2411
Posts: 8
Joined: Sun Mar 10, 2013 8:42 am

Re: Ford E4OD support

Post by cobra2411 »

Just a quick update. Due to those pesky things called life and work I had to put things on the back burner. Th 86 F250 is going to be a manual trans now, but I still haven't given up on seeing if this will work. My goal is to work on this over the summer. I have a functional test transmission from a 90 Bronco and an 87 F250 to use as a test bed. I'm moving and when I do I'll also have a 26x30 shop to work in. :)

I will keep everyone apprised of my efforts.
Top
Post Reply

Return to “MegaShift Transmission Application”