subaru "5eat" also used in nissan g35 and titan

A forum for discussing applications and implementations of the MegaShift transmission controller code for the GPIO from B&G. This can control up to 8-speeds and 6 shift solenoids (plus a 16x9 table for controlling a PWM line pressure valve). It has manual and fully automatic modes (16x9 load x speed table), with under and over rev-limit protection, and full data logging of all inputs and outputs (among many other abilities). A TransStim to test your completed board is also available.
frank_stetmail.comr
Posts: 8
Joined: Wed Oct 20, 2010 4:44 pm

Re: subaru "5eat" also used in nissan g35 and titan

Post by frank_stetmail.comr »

ah ok! , its not entirely strait forward i had to do some looking around and playing to figure it out! .

as for the analog input for the shifter, my shifter is prnd only and the controler doesn't need to know when its doing other than drive.

set up like this it will do everything I ever wanted :D

thanks a bunch !

let me know if you need some testing done. or anything !
Post Reply