Page 1 of 1
Megashift for air shifted 4l80
Posted: Tue Nov 10, 2015 7:25 pm
by Jordoza777
Ok I have the 4l80 with a manual valve body and a trans brake. I have an air shifter on it which will shift up or down with steering wheel mounted buttons. Any possibility the megashift could be set up to up shift all gears with a single solenoid and then down shift all gears with another single solonoid. I know it's a strange application and I could go to an auto valvebody but I already have this set up working good. Any ideas.
Re: Megashift for air shifted 4l80
Posted: Wed Nov 11, 2015 7:13 am
by Bernard Fife
Jordoza777,
It is not impossible that this could be controlled using the 'NAG mode' that is under development. NAG mode switches solenoids on to shift, otherwise they are off while in a gear.
I don't know enough of the details of your setup to say if this will work for you for sure though.
While several NAG functions are already in the code, there is currently no timeline for the NAG mode to be fully implemented, and it will probably be a while.
Lance.