Page 1 of 1
ms2 build
Posted: Tue Mar 31, 2009 5:33 am
by gmto2nr
I just ordered ms 2 3.0 and was wondering if I can run a wideband and egt in datalogging
Thanks
Jason
Re: ms2 build
Posted: Tue Mar 31, 2009 5:52 am
by Matt Cramer
Yes. Widebands need external controllers but are pretty straightforward.
The GPIO board will support EGT readings when complete. Alternatively, you could make a small circuit board to convert the EGT reading to a voltage and use these directions:
http://www.msextra.com/ms2extra/MS2-Ext ... m#addgauge
While for MS2/Extra, I believe they'll work with B&G code too.
Re: ms2 build
Posted: Tue Mar 31, 2009 6:05 am
by gmto2nr
cool thanks matt