Page 1 of 1
CAN pass through
Posted: Fri Aug 25, 2017 9:17 am
by roarin_mouse56
Does the CAN pass through work with MegaShift and MS2 Extra?
Re: CAN pass through
Posted: Fri Aug 25, 2017 9:40 pm
by Rukavina
Yes I run ms2 v3 with gpio board together on canbus
Re: CAN pass through
Posted: Sat Aug 26, 2017 5:15 am
by roarin_mouse56
Are you running MS2Xtra?
Re: CAN pass through
Posted: Sat Aug 26, 2017 9:06 am
by Rukavina
Msextra 3.4.2