Question about TPS/load

For discussing Phil Tobin's TunerStudio MS is the MegaSquirt edition of TunerStudio, a next generation tuning application. It provides the ability to configure and tune all GPIO/MShift(tm) controllers and is 100% compatible with MegaTune ini files and msq's.
Post Reply
Brittain G
Posts: 5
Joined: Tue Jun 14, 2016 4:28 pm

Question about TPS/load

Post by Brittain G »

I was wondering, if you have set the parameters for TPS load table and have MAP versus TPS for LOAD: set to "0" so you are running only TPS. Do the load values in the shift table now represent the percentage of throttle open? (30kpa = 30% tps)

Thank you.
Post Reply