ms2 build

This forum is for general questions you have on assembling and troubleshooting your GPIO board. You can purchase a GPIO board at DIYAutoTune now!
Post Reply
gmto2nr
Posts: 2
Joined: Tue Mar 31, 2009 5:26 am

ms2 build

Post by gmto2nr »

I just ordered ms 2 3.0 and was wondering if I can run a wideband and egt in datalogging
Thanks
Jason
Matt Cramer
Posts: 55
Joined: Thu Apr 17, 2008 5:19 am

Re: ms2 build

Post by Matt Cramer »

Yes. Widebands need external controllers but are pretty straightforward.

The GPIO board will support EGT readings when complete. Alternatively, you could make a small circuit board to convert the EGT reading to a voltage and use these directions:

http://www.msextra.com/ms2extra/MS2-Ext ... m#addgauge

While for MS2/Extra, I believe they'll work with B&G code too.
gmto2nr
Posts: 2
Joined: Tue Mar 31, 2009 5:26 am

Re: ms2 build

Post by gmto2nr »

cool thanks matt
Post Reply