GPIO ordering information

This forum is for general questions you have on assembling and troubleshooting your GPIO board. You can purchase a GPIO board at DIYAutoTune now!
Post Reply
Matt Cramer
Posts: 55
Joined: Thu Apr 17, 2008 5:19 am

GPIO ordering information

Post by Matt Cramer »

We now have GPIO kits on the website! However, because of the variety of uses for the GPIO, we have elected not to make a single, one size fits all, everything required GPIO kit, as you'd probably end up paying - often a lot - for parts you don't use. So, we sell what we call a base kit. This includes the GPIO board, SMD parts, heat sink, voltage regulator, AMPSEAL, jumpers, and case. Then you'd add an application package, such as the MegaShift package, for your desired application. We have one such package out now, with more to come later such as EGT application packs. You can see them in our catalog here:

http://www.diyautotune.com/catalog/gpio-board-c-77.html
Matt Cramer
Posts: 55
Joined: Thu Apr 17, 2008 5:19 am

Re: GPIO ordering information

Post by Matt Cramer »

FYI, we have now released the EGT packages as well. Each EGT package builds one EGT input circuit.
bent wrench
Posts: 4
Joined: Sat Oct 12, 2013 8:43 am

Re: GPIO ordering information

Post by bent wrench »

Will the supplied parts in the trans kit be sufficient to run a 5 speed auto trans?
This is my brain on MS
Matt Cramer
Posts: 55
Joined: Thu Apr 17, 2008 5:19 am

Re: GPIO ordering information

Post by Matt Cramer »

Depends on exactly what inputs and outputs are needed.
Addicted
Posts: 188
Joined: Mon Oct 14, 2013 7:14 am
Location: Winchester, England

Re: GPIO ordering information

Post by Addicted »

Hello Matt, could I ask a more specific question?

What exactly is included in your MegaShift kit? you say "We've also thrown in some extra components" :)

Personally I'm going to need to build the Megashift with outputs for 7 solenoids (6 on/off, 1 PWM), have you thrown in enough "extra components" to do that :) ?

Thanks
Matt Cramer
Posts: 55
Joined: Thu Apr 17, 2008 5:19 am

Re: GPIO ordering information

Post by Matt Cramer »

Here's what is included. It can populate both VR conditioners, all the high current PWM outputs, and a bit more.

Transistors:
10 ZTX450-ND
7 TIP120
1 IRLZ44ZPBF-ND (substitute for RFP30N06LE)
4 2N3904FS-ND

Capacitors
8 399-4329-ND
6 399-2017-ND
1 399-4389-ND
4 399-4239-ND
1 399-4301-ND

Resistors:
31 10KEBK-ND
10 330EBK-ND
1 2.49KXBK-ND
1 15KEBK-ND
11 10KEBK-ND
4 33KEBK-ND
2 2.0MEBK-ND
2 300KEBK-ND
2 10KQBK-ND
2 220KEBK-ND

Diodes
8 1N4751ADICT-ND
14 1N4734ADICT-ND
10 1N4001DICT-ND

Other:
8 mica insulator kits
Post Reply