4L60e upgrade for Mopar 440

A forum for discussing applications and implementations of the MegaShift transmission controller code for the GPIO from B&G. This can control up to 8-speeds and 6 shift solenoids (plus a 16x9 table for controlling a PWM line pressure valve). It has manual and fully automatic modes (16x9 load x speed table), with under and over rev-limit protection, and full data logging of all inputs and outputs (among many other abilities). A TransStim to test your completed board is also available.
Post Reply
Philip Lochner
Posts: 34
Joined: Thu Mar 08, 2012 9:00 am

4L60e upgrade for Mopar 440

Post by Philip Lochner »

Hi all

Can anyone recommend a (single??) source of all the parts I would need to upgrade and rebuild a 4L60e for use behind a Mopar 440 according to the upgrades recommended here (http://www.msgpio.com/manuals/mshift/mods.html)?

Being in South Africa it is really difficult finding someone a) willing to help and b) stocking all the parts needed? (I'm hoping to source all the parts from a single supplier).

Apologies: This post is not strictly Megashift related but it seems I might get help here.
Best regards
Philip
'80 Jaguar XJS 5.3L V12 = MS-2
'74 Jensen Interceptor Mk3 440 V8 = MS-2 + GPIO (GM 4L60e)
Post Reply