Page 1 of 1

Selection of output 1/2 or output 3?

Posted: Fri Apr 14, 2017 1:37 am
by Jim Blackwood
For a PWM output that requires a background low level PWM signal of 5-20%, and then a momentary high level PWM signal of 80-100% during shift events:

What output would be the best choice?
Spare Outputs 1 and 2 or Output 3 maybe?
Can output 3 even be configured that way?
Would the Dither or similar function be used on output 1 or 2, perhaps in conjunction with the clutch function somehow?

Jim