Page 2 of 2

Re: ABS/TCS retrofit

Posted: Mon Feb 06, 2012 8:50 am
by Bernard Fife
Chris,

We continue to work on this, and it is coming along slowly. However, it is a fair way down our priority list, and nothing is likely to be released in the near future.

Re: ABS/TCS retrofit

Posted: Mon Sep 16, 2013 4:18 pm
by nvidrine
I would like to help on this project if I can. I have modest experience in electrical control systems, abs systems, and have access to some newer bosch units for inspection/disassembly with access to diagrams, some schematics, and info.

Re: ABS/TCS retrofit

Posted: Fri Sep 20, 2013 2:38 pm
by Bernard Fife
nvidrine,

We simply haven't had time to make progress on this (other projects, some yet to be revealed, are always a higher priority, it seems). There is certainly nothing to stop one one or more of you from doing this project. Several people have volunteered their time, perhaps someone can volunteer to coordinate the project. You can base it on the GPIO hardware and template code (http://www.msgpio.com/manuals/iocode/code.htm), or anything else of your choosing, of course.

If a new project is based on the GPIO, we will try to contribute where we can. We won't supply our current project, mostly because it would take too much effort to support it properly (by explaining how things work, how they have and have not yet been tested, etc.). But a person could recreate the code themselves in a few weeks of evenings, I suspect; less if it was a cooperative effort (the majority of the effort is in the debugging and testing on the target hardware and in real vehicles, plus the documentation).

Re: ABS/TCS retrofit

Posted: Sat Jun 25, 2016 6:21 am
by phongshader
It's been 3 years since the last post...is this project stillborn?

Re: ABS/TCS retrofit

Posted: Wed Jun 29, 2016 6:44 am
by Bernard Fife
Not so much stillborn as died on the vine due to neglect and a lack of interest. But anyone could reboot it with the GPIO hardware and code (http://www.msgpio.com/manuals/iocode/code.htm) plus some research and work.

Re: ABS/TCS retrofit

Posted: Tue Jul 05, 2016 1:30 pm
by phongshader
That's a shame, I've always been interested but didn't keep asking, ah well....