MSgpio.com read only forums (Jan.15,2018)

CurrentTune.msq Lance, it seems to work well now after a quick drive :) The only immediate issue I noticed is when I selected Burn out mode under "Follow Mode Usage". I put shifter in 3rd and it selects 3rd and will hold it, do a nice burnout, but once I put shifter in 4th and attempt to ...

Thanks Lance, I will try the 5.099x and it's cooresponding ini later in the day today. I attempted to download the 5.099w code today but couldn't get a connection with my newer laptop through the USB converter. I'll try my old Thinkpad that has a serial port and see what happens.
Rob

Hi, I am running Tuner Studio with version 4146 using matching .s19 and .ini. Operating the GPIO stand-alone, gathering non-CAN load via a separate TPS sensor. The Shift, PC Tables and Load Gage are all responding wrt VSS and TPS changes. The problem is the Pressure Control output Only changes with ...

Thanks for quick replys! Inside the loom, OK I'll check that when I'm home again. I'd like those features, so I sure don't want to be without one. But what is then the sensor I thought was the temperature sensor? It's the thing to the very left: http://kasplutt.dyndns.org/Cad/4l80e/ventilblock.JPG ...

Hi Lance, I'm using GPIO as stand-alone and not using CAN but want to read engine rpm. Is it necessary to add all the componets (transistors) to the "VR3" input section when using the GPIO to read Engine RPM from a Tach signal? My tach signal is "square wave" +12v. Thanks for you...

i originally had the same problem and found I had the Tx and Rx wires REVERSED...after i checked them 3 times :O
This is probably not the case for you, but worth double checking
Rob