MSgpio.com read only forums (Jan.15,2018)

Thanks for the reply. I've compared your tune to mine and adjusted some of my parameters. My transmission VSS is good as I also use it for my cruise control, and I have monitored it with my scope. I don't use the Jag VSS for TCU and CC it drives the speedo, ECU and trip computer ATM. I still have th...

Here is a copy of mt msq. Code is 5.201

To avoid this I have set 1 -2 upshift low so the trans won't kick down to high in rpm range

Sorry I didn't explain myself well... The trans is not upshifting then downshifting. If I'm driving on the open road and go to overtake (like if I'm stuck behind a tractor at 60km/h) when I floor the throttle the trans kicks back to 1st gear then immediately upshifts if I'm above the upshift point t...

Background I have a 4L60e 1994 vintage behind a Jaguar V12 that redlines at 6500rpm, I have 1-2 upshift set at around 6000rpm at 100% load which is about 65km/h The issue is the Mshift kicks the trans down to 1st at 60km/h for a milli second then immediately upshifts. I have searched for a tuning pa...

I should have included these files

I am trying to get the TCU setup as standalone with TPS as load (until I get the MS2 installed) I have set the TCU up on the bench with a pot connected to my lab supply (5volts) as a temporary TPS and verified I am getting TPS voltage at EGT1-AD5 jumper. My issue is when I enter calibrate TPS I get ...