MSgpio.com read only forums (Jan.15,2018)

Here are the usual details regarding SMG control

Hi Jim,
Have just downloaded so will go over this evening and check against my wiring diagrams and other information.

Marty

Hi Jim, Hope you had a great vacation, i have been so busy with work lately that this was put on hold. Have a read over your last posts and everything seems to make sense to me. You had outlined.. GPI 1-5: GPI-4 is the brake light input, that needs to stay as is. GPI-3 is temperature. (How badly do ...

Hi Jim, I was able to upload firmware and communicate ok with the ECU. I am using rs232 connector on the amspeal. As for Canbus comms, we will be unable to implement that on our setup during testing as the engine ecu is a long way of final development at the moment. I will have to use an input for e...

Well i have the basic board now built Jim, so need to get a good 12v power supply (old ATI pc maybe) and try and get the firmware onto it, i may need to look at my serial assignments as Rx and Tx may need reversed. http://www.2urgse-supra.herobo.com/wp-content/uploads/2013/02/IMG_20130217_151711.jpg...

Jim my board has just been released by customs, i collect this week so will have to touch base on the build up.

Marty

Auto/Manual shift Switch and paddle input http://www.msgpio.com/manuals/mshift/mode_button.gif * diodes (1N4001 or equivalent) This setup would require just 2 inputs When the mode switch is closed, auto mode will be used, regardless of what you do with the shift buttons. If the mode switch is open,...

Hi jim, sorry about the lack of replies. Unforrtunatley customers cars have taken priority on lead up to Christmas, but we hope to get back on track in Jan and give this 100% commitment. I would have liked to use the transmissions own switching with a toggle for manual mode, failing that it may be p...

jim that viedo was just me testing how to interact data with the Coding to display results. Basically i have written the software and routines to display the data i would like. Basically i looked at the Mshift availabe data, and also what was important for the driver. 1. RPM 2. Trans Temp 3. Selecto...

jim i purchased the 4d systems uvga as it has serial and 16 i/o's, im outputing to a 5" lcd that replaces the stock tacho. the coding is easily applied to all their tft modules. i programmed a simple display demo to get to grips with it

http://www.youtube.com/watch?v=LDtzsyd88VU

Marty